Vycor Select Self Adhered Roofing Underlayment

Description

Vycor® Select™ self-adhered roofing underlayment is the performance alternative to granular surfaced underlayments. It meets industry and code-based standards of performance for fastener sealability and provides fast and easy installation. Vycor® Select™ roofing underlayment is a lightweight and easy-to-handle material, measuring 25 mils (0.64 mm) in thickness. Its advanced rubberized asphalt formulation meets industry standards for fastener sealability, despite being thinner and lighter than many comparable products. The release liner backing protects the adhesive quality, which can be easily applied to the roof deck after removal. The membrane comes in a 195 ft2 (18.1 m2) roll, 36 inches (914 mm) wide, with a RIPCORD® feature for convenient application in detail areas. During installation, ensure the structural deck is clean, dry, and continuous. Apply Vycor Select in fair weather conditions, with appropriate temperatures for both the air, roof deck, and membrane. Proper priming of certain surfaces may be necessary for optimal adhesion. The membrane should be installed with consistent laps that shed water, working from the low point to the high point of the roof. It's important to extend the membrane above the expected levels of water backup from ice dams and snow accumulation for proper protection. Several precautions and limitations should be observed, including the use of fall protection, caution with slippery release liners, and avoiding prolonged exposure to sunlight. Vycor Select should not be folded over the roof edge without appropriate flashing material, and fasteners should not be installed over unsupported areas of the structural deck. Additionally, Vycor Select has specific product compatibility guidelines and meets industry standards for fire classification. You can depend on the comprehensive support and expertise from the makers of Vycor® Ice & Water Shield® to ensure a smooth and successful application process.